Clan Français Basé sur le Jeu The WARZ

Vous n'êtes pas identifié.

#1 10-10-2018 05:41:47

Date d'inscription: 10-07-2018
Messages: 194

die an die Aktionäre tatsächlich ausgegeben wurden.

Type HS Power Roof Ventilators have been tested to operate:

- conituously at 650 F;
- 3 Hours at 800 F;
- 1.5 Hours at 1000 F;
- 12 Hour at 1 Montravius Adams Packers Jersey ,200 F.

Fans Mall Co. has introduced wide range of Heat and Smoke Removal Power Roof Ventilators. These PRVs are especially designed, built and proven by independent test to meet the need of venting hot gases and smoke in the event of fire in commercial and industrial buildings, such as factories Josh Jones Packers Jersey , warehouses, parking garages, shopping malls and department stores.

Type HS PRVs reliably extract large volumes of hot gases and smoke regardless of building configuration Kevin King Packers Jersey , location and weather conditions. They withstand high temperatures for long periods of time.

A reliable ventilation system that can operate during a fire is both vital and essential. It prevents smoke logging, allows people to escape quickly, minimizes damages to property and contents and enables firemen to attack the fire without hindrance. These power roof ventilators have the added advantage of providing normal day to day ventilation and in many cases can also be fitted with duct work for use in multi storey buildings.

The concept of venting smoke and heat was first outlined by Industrial Risk Insurers (IRI). Use of powered ventilation could eliminate the problems experienced with gravity vents. Specially designed roof mounted exhaust fans would mechanically vent heat and smoke under emergency fire conditions.

In addition to the reliability and effectiveness of this powered ventilation concept Josh Jackson Packers Jersey , the use of HS PRVs to vent heat and smokes has these specific advantages:

* It is not dependent on air temperature differential or wind direction and velocity to create air movement.
* It does not rely on heat itself to activate the system. Smoke detectros and water-flow devices also may be utilized.
* It provides for normal ventilation needs of the building as well as for emergency use as a vital component of the fire protection system.
* There is ususally a substantial cost saving in the purchase and installation of the dual purpose system.
* Maintenance cost for building and equipment is frequently reduced.
* The system can be effectively used in multi storied and below grade building areas.
* Reliability of operations is assured because powered ventilators are in daily use and receive regular inspection and maintenance.

The unique Type HS power roof ventilators provide a solution for emergency heat and smoke venting that is dependable under the most extreme circumstances.

All critical components of HS PTV that exposed to the airstream are ferrous construction to withstand high temperature conditions. These heavy gauge materials prevent warping of fan parts and malfunction at high temperatures. This also insures years of trouble-free service in normal daily operation of the PRV.

The wind shroud is made of galvanized steel; an exterior finish coat of epoxy can be specified. Painted parts are coated with epoxy to provide a protective coating rated excellent for hardness, impact resistance, adhesion and chemical resistance.

Belt and bearings are protected from the air stream by enclosing them in a ventilated tube. Design of HS fan incorporates a heat slingerimpeller. It isolates the fan bearings from damaging heat and draws cooler outside air through the motor compartment and over the belt and bearings. A spring loade Jaire Alexander Packers Jersey , fusible link activated device automatically opens dampers when temperature at the fan reaches 165 F. Thei enables the fan to function as a gravity ventilator prior to powered operation.

A safety disconnect switch is mounted to the PRV housing. This feature protects maintenance personnel from an accidental fan start when the unit is being serviced.

Additional information can be found at the Fans Mall Company web site http:barryfan.net

Susana Terlicki
Industrial Equipment Engineer
Fans Mall Co.
Im Prinzip ist eine Corporation das amerikanische Gegenstück zur deutschen Aktiengesellschaft. Die Gründung einer Corporation ist aber viel einfacher als die Gründung einer deutschen Aktiengesellschaft oder GmbH. Eine <"http:uscorporationvorteile-us-corporation">U.S. Corporation Services zeichnet sich besonders dadurch aus, dass die Haftung auf das Gesellschaftsvermögen beschränkt ist (limited Liability) und die Gesellschaft auch über den Tod der AnteilseignerGründer hinaus bestehen bleibt.

Bei Gründung der US Corporation wird diese mit einem autorisierten Kapital ausgestattet, welches in eine bestimmte Anzahl von Aktien aufgeteilt ist. Dies bedeutet aber lediglich Ty Montgomery Youth Jersey , dass die Corporation berechtigt ist, Aktien an Anleger auszugeben. Hier unterscheidet man zwischen Issued Shares und Authorized Shares. Bei den Authorized Shares handelt es sich um die Anzahl der Aktien, welche zur Ausgabe genehmigt sind. Diese Anzahl ist als Authorized Capital in der Gründungsurkunde der Corporation (Articles of Incorporation) festgehalten. Issued Shares hingegen sind die Aktien Quinten Rollins Youth Jersey , die an die Aktionäre tatsächlich ausgegeben wurden. Bei US Corporationen ist es möglich, dass eine einzige Person alle Aktien besitzt. Gehören also die Aktien einer einzigen Person, hat diese das alleinige Sagen im Unternehmen Kenny Clark Youth Jersey , da jede Aktie . Cheap Sports Jerseys   Cheap Jerseys China   Wholesale Jerseys   Cheap Authentic Jerseys   Cheap Jerseys China   Cheap Jerseys China   Cheap Custom Jerseys   Cheap Authentic NHL Jerseys   Cheap Nike NFL Jerseys   Cheap College Baseball Jerseys

Hors ligne

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com